Εκθέσεις & ΕκδηλώσειςAugust 18, 20264 λεπτά ανάγνωσης

Η AUKRU Παρουσιάζει Τροφοδοτικά Υψηλής Ισχύος Νέας Γενιάς GaN III στο Global Sources Hong Kong

Η AUKRU παρουσίασε τη νεότερη σειρά της από υπερσυμπαγείς φορτιστές GaN III 65W έως 140W και τροφοδοτικά με εναλλάξιμα βύσματα, προσελκύοντας αγοραστές OEM από την Ευρώπη, τη Βόρεια Αμερική και την Ασία.

AUKRU Showcases Next-Gen GaN III High-Power Adapters at Global Sources Hong Kong
👑
AUKRU Engineering Team
Τεχνολογική Έρευνα Τροφοδοσίας AUKRU
Δημοσιεύτηκε:August 18, 2026

At the recent Global Sources Consumer Electronics Show held at AsiaWorld-Expo in Hong Kong, AUKRU officially showcased its revolutionary third-generation Gallium Nitride (GaN III) high-power adapter lineup. Designed for high-density consumer electronics, enterprise laptops, and industrial telecom terminals, the new series delivers up to 140W of dynamic power in an ultra-compact enclosure that is 45% smaller than conventional silicon-based adapters.

Visitors to the AUKRU booth experienced live demonstrations of simultaneous multi-port fast charging under full thermal load. Equipped with intelligent power allocation algorithms, the GaN III series supports PD 3.1, PPS, QC 5.0, and SCP protocols, safely delivering peak wattage with thermal dissipation optimized below 58°C case temperature under continuous full-load operation.

“Our OEM partners require not only smaller footprints but also rock-solid reliability that meets international tier-1 efficiency benchmarks,” explained AUKRUs Chief Technology Officer. “By integrating planar transformer technology and synchronous rectification into our GaN architecture, we have achieved conversion efficiencies exceeding 93.5%.”

During the four-day event, AUKRU established strategic cooperation agreements with over 30 international distributors and custom electronics brands across Germany, the United States, Japan, and Australia. Sample trial kits for 65W, 100W, and 140W desktop and wall-mounted models are now available for global engineering evaluation.

💡 Βασικά Μηχανικά Συμπεράσματα

  • Πλήρης συμμόρφωση με τα πρότυπα IEC/EN 62368-1, IEC 60601-1 και τα κριτήρια απόδοσης EU CoC Tier 2.
  • Υποστήριξη προσαρμοσμένων καλουπιών, ιδιωτικών περιβλημάτων και βυσμάτων DC/Type-C για μαζικές παραγγελίες.
  • 100% αυτοματοποιημένος ηλεκτρικός έλεγχος ATE και δυναμική δοκιμή burn-in πριν από την τελική συσκευασία.
  • Αποστολή δειγμάτων εντός 3-5 εργάσιμων ημερών για πιστοποιημένους διεθνείς πελάτες OEM/ODM.
Ετικέτες Θέματος:#GaN III#Global Sources#Exhibition#PD 3.1#OEM / ODM

Έχετε ένα έργο προσαρμοσμένου τροφοδοτικού;

Οι μηχανικοί της AUKRU μπορούν να προσαρμόσουν τις τάσεις εξόδου, τις διαστάσεις του PCB και τις πιστοποιήσεις στις ακριβείς προδιαγραφές σας OEM.

Ζητήστε Προσφορά & Δείγματα →